Operation Manual

23
• Start-up :
Action Control panel Display
Zone selection Press on key [ + ] [ 0 ] and control light on
Full power setting Press on key [ + ] [ 1 ] …… to……. [ 9 ]
Automatic cooking Press on key [ + ] [ 9 ] is blinking with [ A ]
Power level selection Press on key [ - ] [ 9 ] [ 8 ] [ 7 ] …..….[ 1 ]
(for example « 7 ») [ 7 ] is blinking with [ A ]
• Switching off the automatic cooking :
Action
Control panel Display
Zone selection Press on key [ - ] [ 9 ] [ 8 ] [ 7 ]…….. [ 0 ]
Power level selection Press on key [ + ] Level selected
Control panel locking
To avoid modifying a setting of cooking zones , in particular with within the framework of
cleaning the control panel can be locked (with exception to the On/Off key [ 0/I ]).
• Locking :
Action Control panel Display
Start Press on key [ 0/I ] [ 0 ] or [ H ] on 4 displays
Hob locking Touch simultaneously [ - ] and [ + ]
at front right * No modification
Press on key [ + ] [ L ] on 4 displays
• Unlocking :
Action Control panel Display
Start Press on key [ 0/I ] [ L ] on 4 displays
In the 5 seconds after start :
Unlocking the hob Touch simultaneously [ - ] and [ + ]
at front right * [ 0 ] or [ H ] on 4 displays
Press on key [ - ] No light on the displays
COOKING ADVICES
Pan quality
Adapted materials: steel, enamelled steel, cast iron, ferromagnetique stainless-steel,
aluminium with ferromagnetique bottom.
Not adapted materials: aluminium and stainless-steel without ferromagnetique bottom,
cupper, brass, glass, ceramic, porcelain.
The manufacturers specify if their products are compatible induction.
To check if pans are compatibles :
• Put a little water in a pan placed on an induction heating zone set at level [ 9 ].This
water must heat in a few seconds.
• A magnet stucks on the bottom of the pan.
Certain pans can make noise when they are placed on an induction cooking zone. These
noise doesn’t mean any failure on the appliance and doesn’t influence the cooking operating.