Operation Manual

163

AFTER CLEANING, REPLACE THE INNER GLASS PANE

When replacing the inner glass pane, make sure that:

• you replace the pane correctly, as shown. The pane must be in the position described

belowinordertotintothedoorandtoensurethattheapplianceoperatessafelyand

correctly.

• you take extra care not to bump the edges of the glass against any object or surface.

• youdonotforcethepaneintoplace.Ifyouareexperiencingdifcultiesreplacingthe

pane, remove it and start the process again from the beginning. If this still does not

help, call Customer Care.

• check that you are holding the pane the correct way. You should be able to read the

wording on it as it faces you.

• Check that the gasket “A”isinplace(g.6.12).Ifnot,correctlyplacethegasketinthe

top edge of the inner glass (in the centre).

1. Insert the inner glass pane in the uppermost pair of grooves and push it slightly (arrow

1ingure6.12).

2. Gentlylowerintoplace(arrow2ingure6.12).

Fig. 6.12