User Manual
.Quick explanation .Functional description of the display
.Parameter setting .Matching operations
After the display alarms, press anywhere on the display to remove the prompt
sound, and the flickering prompt will continue till the fault is removed
Air-leaking prompt of tire
Low-power prompt of sensor
Tire pressure is lower than
29PSI
Tire temperature is over 65
Setting the unit of pressure
2.Press key as
shown above
1.Hold for
6 seconds
3.Press to
enter
4.Press key to
set the unit
5.Hold to
save
Caution: Maximum pressure alrarm value can be set to 99PSI (8.0 BAR)
Max pressure can be show to 99 PSI (8.0 BAR)
(The parameters have been set before delivery, and the operations below are not needed)
Note: The operations have been matched before delivery, and they are only needed
when the data is missing, or when the sensor or the display needs to be replaced.
4.Tighten (air-leaking
sound will be heard)
User Manual
Wireless Tyre pressure
monitoring system
Left front tire
pressure
Left front tire
temperature
Electric quantity
of display
Abnormal alarm
Unit of temperature
Unit of pressure
High-pressure alarm
Low-pressure alarm
Tire-temperature alarm
Air-leaking alarm
Low-power alarm
Tire pressure is over 44PSI
Setting the unit of temperature
2.Press key as
shown above
1.Hold for
6 seconds
3.Press to
enter
4.Press key to
set the unit
5.Hold to
save
Setting the upper alarm value of tire pressure
2.Press key as
shown above
1.Hold for
6 seconds
3.Press to
enter
4.Press key to
set the unit
5.Hold to
save
Setting the lower alarm value of tire pressure
2.Press key as
shown above
1.Hold for
6 seconds
3.Press to
enter
4.Press key to
set the unit
5.Hold to
save
Setting of upper alarm value of tire temperature
2.Press key as
shown above
1.Hold for
6 seconds
3.Press to
enter
4.Press key to
set the unit
5.Hold to
save
Interchange tire setting
2.Press key as
shown above
1.Hold for
6 seconds
3.Press to
enter
4.Press key to
set the unit
5.Hold to
save
6.Press Key s
etting position
7.Hold to
save
Matching of outer sensor
2.Enter as shown above
1.Press for 5times
repeatedly
3.Press key to
choose the position
5.The matching succeeds
when the data is displayed
6.Hold to save
4. Inflate or deflate
Matching of internal sensor
2.Enter as shown above
1.Press for 5times
repeatedly
3.Press key to
choose the position
5.The matching succeeds
when the data is displayed
6.Hold to
save
Left front tire temperature
Left front tire pressure
Unit of temperature
Abnormal alarm
Unit of pressure
Tire position
Electric quantity of display
Switch on and select button
Confirm button
Caution: Turn on the power of the display and then install the sensor.
Follow this step, and the data can be displayed at real time.
Press and hold the - button
for 3-6s to turn on.
Press and hold the - button
for 3-6s to turn off.
（High temperature alarm/Low power alarm Interface/switch to pressure
after alarming 8s and switch to temperature/low power alarm interface
automatically after 8s.Rrpeat the switching until fault removed）
!
For example,the alarm value setting by the user are as follows:
High pressure alarm value:44PSI
Low pressure alarm value:29PSI
High temperature alarm value:65℃