Specifications
INSTALLATON INSTRUCTIONS
NOTE:
Ensure to check all parts are present.
A: Synthetic leather with foil and zipper
B: Control panel
C: Spa pool
D: Test strip
E: Digital lock
F: Ination Hose
G: Filter cartridge
H: Drainage hose
I: Repair kit
J:Barometer
K:Inatable bladder
A. Site Requirements
WARNING: The oor has to be capable of supporting the expected load.
WARNING: An adequate drainage system has to be provided to deal with overow water.
IMPORTANT: Because of the combined weight of the spa, water, and users, it is extremely important that
the base where the Spa is installed is smooth, at, level and capable of uniformly supporting this weight
for the entire time the spa is installed. If the spa is placed on a surface, which does not meet these require-
ments, any damage caused by improper support will void the warranty. It is the responsibility of the Spa
owner to assure the integrity of the site at all times.
a) Indoor Installation:
Be aware of special requirements if you install the spa indoor.
The oor must be able to withstand the capacity of the spa. The oor should be a non-slip, level sur-
face.
Proper drainage is essential for indoor spa installation. When building a new room for the spa, it is
recommended that a oor drain be installed.
Humidity is a naturally side effect with spa installation. Determine the effects of airborne moisture on
exposed wood, paper, etc. in the proposed location. To minimize these effects it is best to provide
plenty of ventilation to the selected area. An architect can help determine if more ventilation is need-
ed.
NOTE: Do not install the spa on carpet or other material that can be damaged by moisture.
b) Outdoor Installation
WARNING: TO AVOID THE ELECTRIC SHOCK, DO NOT USE THE SPA WHEN IT IS RAINING.
No matter where you install the spa, it’s important you have a solid support foundation. If you are in-
stalling the spa outdoors, ensure there are no sharp objects that could damage it and that the location
A. B. C
)
,
.
D. E.
G.
J.
H.
K.
www.the-mspa.ca










