Specifications
1.5m
Zone 1 Zone 1Zone 2 Zone 2
Zone 0
Zone 0
Zone 0
1.5m 1.5m2.0m2.0m
2.5m
2.5m
1.5m
NOTE - The measured zone dimensions are limited by walls and xed partitions.
Figure 702A - Zone dimensions of swimming pools and paddling pools
SAFETY & ANNOUNCEMENTS
a. A local supplementary equipotent bonding shall connect all extraneous conductive parts in Zones 0,1
and 2 with protective conductors of all exposed conductive parts situated in these zones;
b. The measures of protection by non-conducting location and by earth-free equipotent bonding are not
permitted;
c. Electrical equipment shall have at least the following degrees of protection:
In Zone 0: IPX8
In Zone 1: IPX5
In Zone 2: IPX4
d. Junction boxes shall not be installed in Zones 0 and 1 except in zone 1,where permitted for SELV cir-
cuits.
e. In Zones 0 and 1, no switchgear and accessories shall be installed;
f. The transformer must be located outside zone1
LIMITED WARRANTY - TERMS & CONDITIONS
This warranty extends to the original purchaser only. The warranty period commences on the original pur-
chase date through 6-12 months according to the different parts. This warranty is not transferable to sub-
sequent purchasers. This warranty is subject to the obligations, limitations, and exclusions listed below.
Extent of warranty
6 months warranty on spa pool and 12 months for electric parts.
Obligations of Purchaser
The purchaser must establish, by dated sales slip, invoice, or installation receipt, the date of original pur-










