Specifications



Problems Probable Causes Solutions
Control box does not operate
-Power failure
-RCD tripped
-RCD broken
-Check power source
-Reset RCD/Check if the home fixed wiring too thin
to afford 2300W.
-Call for service if it does not reset.
Control box does not heat properly
-Temperature set too low
-Dirty Filter Cartridge
-Improper water levels
-Heating element failed
-Set to a higher temperature (between 20-40ć)
-Clean/replace the Filter Cartridge in time
--Add water to specified levels
-Call for service
Bubble Massage System does not work -Pump is too hot
-30-minute auto shut off feature
activated
-Something is wrong with the control
box
-Unplug the Pump. After the Pump has cooled
insert the plug and press the bubble button to
activate
-Press the bubble Button to reactivate
-Call for service if it does not reset
Water Filtration not working -Dirty Filter Cartridge
-Something is wrong with the control
box
-Clean/replace the Filter Cartridge in time
-Call for service if it does not reset
Spa leakage -Spa is torn or punctured -Use provided Repair Patch
Water not clean -Insufficient filtering time
-Dirty Filter Cartridge
-Improper water maintenance
-Increase filtration time
-Clean/replace the Filter Cartridge
-Refer to the chemical manufacturer’s instructions
“SH”or “SL”indicated on the control panel.
-The pins inside the black connectors are
bent or wet.
-Straighten the bent pins or dry the pins.
DISPOSAL
1.The marking indicates that this product shall not be disposed with the general household
waste. Please contact your local community about collection points or ask your dealer.
2.This product contains valuable materials that can be recycled and contribute to a sustainable enviroment.
3.For recovery, recycling and dismantling information for this product, please visit us at www. the-mspa.
com
WATER PROTECTION LEVEL
Warring: Water protection levels of Appliance at different product zones are different see the following
scheme.