Specifications

36
Kits & Accessories www.linearcorp.com800.421.1587
Intercom Accessories
The Model DRW Door Release
Mechanism is an electro-mechanical
device that will release a door strike
when activated. The DRW can be used
with DMC1, DMC3-4, and DMC-10
systems to grant access through a
controlled door.
The door release mechanism is powered
by a Model RT11 Power Transformer.
The intercom system provides a relay
contact closure to switch the power
from the transformer to the door release.
The Model RT11 Remote Transformer is
a UL Listed, 24-volt AC with center tap,
40 VA plug-in wall transformer typically
used as a local power supply for the
Model DRW Door Release Mechanism.
The transformer is supplied with a
50-foot, 4-conductor cable.
The Model RT35 Remote Transformer is
a UL Listed, 24-volt AC with center tap,
40 VA direct wire transformer typically
used as a local power supply for the
Model DRW Door Release Mechanism.
DRW
Door Release Mechanism
RT11
Remote Transformer
RT35
Remote Transformer
The Model TE2D Transformer Assembly is an ETL Listed,
24-volt AC with center tap, 40-VA direct wire transformer
used to power the Model DMC1MM Add-on iPlay iPod
Dock - MP3 & CD player or the DMC1CD Add-on 6-disc
CD Changer. The transformer mounts in the bottom of a
Model DMC1HC Wall Housing.
The transformer output wires are terminated with a
connector that fits either the DMC1CD or DMC1MM units.
The Model TE5D Transformer Assembly is an ETL Listed,
dual-output 16-volt AC, 37-VA direct wire transformer
used to power the Model DMC1 and DMC3-4 Music/
Communications Systems. The transformer mounts in
the bottom of Model DMC1H or DMC1HC Wall Housings.
The transformer output wires are terminated with a
connector that fits the DMC1 or DMC3-4 master.
TE2D
Transformer Assembly
TE5D
Transformer Assembly
ORDER # DRW
ORDER # TE2D
ORDER # RT11
ORDER # TE5D
ORDER # RT35