Specifications

32
Kits & Accessories www.linearcorp.com800.421.1587
MS2SX5SC
Shielded Speaker Cable
The Model MS2SX5SC Shielded Speaker Cable is 2-conductor,
22-gauge, shielded cable. The cable is supplied in a 500-foot roll.
The cable’s shielding reduces outside electrical interference from
radio frequency sources.
The cable’s jacket is yellow. The cable contains two solid copper
22-gauge wires with blue and violet insulation. The blue and violet
wires are foil shielded as a pair and have a shield drain wire.
This cable is typically used for connecting a Model FMSM, FMC8,
NR8M, or NR8P 45-ohm Intercom Speaker to a Model MVC1
Monaural Volume Control.
MS4DCX5SC
Shielded Door Station Cable
The Model MS4DCX5SC Shielded Door Station Cable is
4-conductor, 22-gauge, shielded cable. The cable is supplied in
a 500-foot roll. The cable’s shielding reduces outside electrical
interference from radio frequency sources.
The cable’s jacket is orange. The cable contains four solid copper
22-gauge wires with red, black, orange, and yellow insulation.
The red and black wires are foil shielded as a pair and have a
shield drain wire. The orange and yellow wires are foil shielded
as a pair and have a shield drain wire.
This cable is typically used to connect door stations to DMC1
and DMC3-4 systems.
PBVM127X1
Low-Voltage 2-Conductor Wire Pull Box
The Model PBVM127X1 Low-voltage 2-conductor Wire Pull Box
is 2-conductor 18-gauge wire. The wire is supplied in a 1,000-foot
pull box for easy wire installation.
The cable contains two solid copper 18-gauge wires with red
and white insulation.
This cable is typically used for connecting RT11 Remote
Transformers and DRW Door Release Mechanisms to DMC1
and DMC3-4 systems.
ORDER # MS2SX5SC
ORDER # MS4DCX5SC
ORDER # PBVM127X1
Wire & Cable