Specifications

10
DMC1 Intercom System www.linearcorp.com800.421.1587
Standard Mounting Frames
The Model DMC1F Combination Mounting Frame is used in
new and retrofit intercom installations. The frame is designed
to fit a DMC1 or DMC3-4 Music/Communication System.
In new installations, use the DMC1F combination frame when
installing a DMC1 with a DMC1CD or DMC1MM below the
master.
In retrofit installations, use the DMC1F combination frame
when replacing a master-only system with a DMC3-4 or
DMC1 and a DMC1CD or DMC1MM below the master.
NOTE: The wall hole will need to be enlarged for this type
of retrofit installation.
The Model DMC1FRG Room Station Gap Frame is used
in installations where a gap is exposed around the room
station mounting hole. The frame is designed to fit all
DMC1 indoor room stations.
DMC1F / DMC1FA / DMC1FB
Combination Mounting Frame
DMC1FG
Master Gap Frame
DMC1FRG
Room Station Gap Frame
DMC1F (White)
DMC1FA (Almond)
DMC1FB (Black)
The Model DMC1FG Master Gap Frame is used in
installations where a gap is exposed around the master
mounting hole. The frame is designed to fit DMC1 and
DMC3-4 masters.
ORDER # DMC1F / DMC1FA / DMC1FB
ORDER # DMC1FG
ORDER # DMC1FRG