music communications system Finish-Out Instructions dmc1

dmc1
www.mssystems.com | 800.421.1587 | www.mssystems.com
Page
7
Satellite Volume Control MVC1 Series
At each MVC1 location strip approximately 4 inches of jacket from
wires and separate colored
conductors from each other.
Connect drain wires together
from both cables using a wire
nut. Wire nut each colored
conductor to its respective
wire as shown in figure 4.
Connect blue and violet wires
to the corresponding terminals
of the satellite speakers.
Mount the MVC1 to the single
gang box using the two screws
provided with the volume control.
External Music Source - AWP
Use the labels provided to mark respective cables. Connect the cables
to the plate as shown in figure 5 and mount the plate using the two
screws provided.
Figure 4 - Volume control wiring
Figure 5 - External source wiring
to dmc 1