Owner`s manual

16 M&S Systems 2861 Congressman Lane Dallas,Texas 75220 800.877.6631 www
.mssystems.com
• Line-level audio cables carrying audio to the Central Controller are shown connecting the audio sources to the
Central Controller.
• Line-level audio cables carrying audio out from the Central Controller are shown connecting the Central
Controller to the tuner audio component.
The Emitters are plugged into the IR Emitter ports on the back of the Central Controller as shown in Figure 8.
• Connect each IR Emitter cable to the corresponding IR output on the back of the Central Controller.
• Remove the adhesive back and position each IR repeater on the product you wish to control. Stick the repeater
directly over the audio equipment IR window. Extra adhesive backs are provided.
Figure 8—Wiring for Audio Sources and IR Emitters