User manual
8
Mode of operation: Standard, without locomotive
engineer.
Mode of operation: Semi-pro; the consumption of supplies is displayed and must be
replenished accordingly at the refueling and re-supply facility.
Mode of operation: Pro; the consumption of supplies is displayed and can be
replenished accordingly at the refueling and re-supply facility.
When the symbol for the engineer’s cab
is activated, the Central Station display
switches over to the engineer’s cab assigned to the locomotive. The locomotive is
operated using the elements on the screen and the two Central Station 2 control
knobs.
You can change at any time between the engineer’s cab and the standard control
screen. The consumption of the fuel and supplies continues to remain active.
Mode of operation: Specialist. If the symbol for the engineer’s cab is activated, the
CS screen switches to an engineer‘s cab assigned to the locomotive. The locomotive is
operated using elements on the screen and the two CS2 control knobs.
For the last two locomotive engineer’s profiles mentioned above you can determine the location of a
locomotive refueling station (BW) using electrical contacts and a feedback module. 2 contacts per re-
fueling station must be present on the layout. The first contact is for requesting fuel and the 2nd contact
is the locomotive refueling facility that has been reached (diesel refueling station, sand bunker, coaling
station, etc.).
Locomotive Engineer Proles and Their Symbols
Supplies must be replenished. This indication only appears in the locomotive engineer profiles
for Pro and Specialist when the indication has been activated by means of a contact on a
feedback module. You must confirm with this button that you want to replenish the fuel and
supplies. This button will then appear
.
Requesting locomotive fueling and supply facility. This button will appear in the Pro and
Specialist modes when you press on a supply indicator. It enables you to replenish and fuel and
supplies.
Replenishing fuel and ending the refueling procedure.
Locomotive Servicing and Symbols
Symbol: Configuration
Symbol: Engineer’s cab
Symbol: Add fuel
Symbols in the Control Window