User Manual

21
Less-frequently used keys.
These keys are flat membrane-type keys that are embossed around their edges to make them easy
to identify by feel.
Some of the keys have two colors of text identifying them. The red text is the default function of
the key; pressing the key by itself will cause it to perform this function. The function in blue text
is initiated by first pressing the blue “2ndF” key.
Mov/Sta – Toggles the radar between moving and stationary operating modes.
Stopw – This is accessed using the 2
nd
F key. Toggles the radar between normal radar mode and
stopwatch modes.
Test – Manually initiates a self-test of the radar. The radar will momentarily light all of its
displays and icons. Then it will test itself at various speeds. If no problems are found,
the radar will return to its previous mode of operation. If a problem is found, the radar
will display “Err” in the target window and cease to measure speeds.
The radar performs additional self-tests invisibly during normal operation (initiated
automatically). The radar emits a double beep if no problems are detected and displays
“Err” if a problem is found.
Pat Bl – When the radar is in Standby mode, pressing this button will cause the radar to blank the
patrol speed display. Pressing the button while the patrol speed display is blanked will
cause the locked patrol speed to reappear.
Low/Hi – This is accessed using the 2
nd
F key. Selects the city or highway filter to reduce patrol
speed shadowing or combining.
“—” – Works with the menu button. Causes the radar decrease the audio volume if no selection
has been made. Decreases the setting of the menu item if a menu selection has been
made.
Menu – Allows the selection of modes and settings that do not have individual buttons on the
remote. Is described further in the Menu section of this manual.
“
+”– Works with the menu button. Causes the radar to increase the volume if no selection has
been made. Increases the setting of the menu item if a menu selection has been made.
2nd F – Causes the radar to select the blue second function of a key instead of the red primary
function of the key. “2nd” appears in the middle window when it is pressed. Pressing
this key a second time causes “2nd” to disappear and allows the radar to select the
primary (red) function of a key.
Backlt – Manually causes the backlight of the remote control to turn on for 7 seconds. Once
activated, the backlight turns on for 7 seconds after any button is pressed.