User Manual

7
vehicle is traveling in addition to the speed that it is traveling. This unique
feature helps you to positively identify the vehicle being measured.
Now, press the Same button on the remote. You will notice that only the arrow
corresponding to the patrol car’s lane is illuminated. This indicates that the radar
will only measure the speed of vehicles moving in that direction (moving away
from the patrol vehicle on the front antenna and approaching the patrol vehicle on
the rear antenna). The radar will only measure the speeds of vehicles moving in
that lane of traffic regardless of whether there is a stronger vehicle moving in
the opposite lane of traffic. The BEE III allows the radar to look past traffic
moving in the other lane of traffic to see only the traffic in the lane that interests
you.
Now press the Opposite (Opp) button on the remote. You will notice that the
arrow moves over to the other lane of traffic in the Mode window. In this mode,
the radar will only display the speed of vehicles moving in that direction (moving
toward from the patrol vehicle on the front antenna and away from the patrol
vehicle on the rear antenna). Like in the previous case, the radar will only
measure the speeds of vehicles moving in that lane of traffic regardless of
whether there is a stronger vehicle moving in the opposite lane of traffic.
You can toggle between the lane you want to measure by pressing the Same and
Opp keys. If you want to go back to monitoring both lanes of traffic, you must
press the Mov/Sta key twice.