User's Manual

8
Less-frequently used keys.
These keys are flat membrane -type keys which are embossed around their edges to make them easy
to identify by feel.
Some of the keys have two colors of text identifying them. The red text is the default function of
the key; pressing the key by itself will cause it to perform this function. The function in blue text is
initiated by first pressing the blue “2ndF” key.
Mov/Sta – Toggles the radar between moving and stationary operating mode s.
Stopw – Toggles the radar between normal radar mode and stopwatch modes.
Test – Manually initiates a self -test of the radar. The radar will momentarily light all of its
displays and icons. Then it will test itself at various speeds. If no problems are found, the
radar will return to its previous mode of operation. If a problem is found, the radar will
display “Err” in the target window and cease to measure speeds.
The radar performs additional self -tests invisibly during normal operation (initia ted
automatically) and only alerts the operator if an error is detected.
Pat Bl – When the radar is in Standby mode, pressing this button will cause the radar to blank the
patrol speed display. Pressing the button while the display is blanked will cause the locked
patrol speed to reappear.
Low/Hi – Adjusts the patrol speed between its low and high speed ranges.
“—“ – Works with the menu button. Causes the radar to move backward through the menu
selections if no selection has been made. Decreases the s etting of the menu item if a menu
selection has been made.
Menu – Allows the selection of modes and setting that do not have individual buttons on the
remote. Is described further in the Menu section of this manual.
“+”– Works with the menu button. Cau ses the radar to advance through the menu selections if no
selection has been made. Increases the setting of the menu item if a menu selection has
been made.
2nd F – Causes the radar to select the blue second function of a key instead of the red primary
function of the key. “2nd” appears in the middle window when it is pressed. Pressing this
key a second time causes “2nd” to disappear and allows the radar to select the primary
(red) function of a key.
Backlt – Manually causes the backlight of the remot e control to turn on for 7 seconds. Once
activated, the backlight stays on automatically for 7 seconds after a key is pressed.