User's Manual

9
Menu
No presses of the menu button – Adjust the audio volume
Audio volume has 7 settings (including mute). During volume ad justment, “A” is
displayed in the middle window of the radar, followed by the current setting.
On its initial power -up, the volume is initially set to level 3. On subsequent power -ups, the
BEE III retains the volume setting it had when the radar was turn ed off.
Pressing the “ —“ key lowers the volume one level; pressing the “ +” raises the volume.
Pressing the Menu key after making and adjustment returns the radar to its normal
operating mode. Pressing the Menu key without making an adjustment causes the radar to
move on to the next menu setting.
One press of the menu button – Adjust the range
The range has 7 settings. The range setting does not affect the transmitted power, only the
sensitivity of the radar. During range adjustment, “r” is displayed in the middle window of
the radar, followed by the current setting.
On its initial power -up, the range is initially set to maximum. On subsequent power -ups,
the BEE III retains the range setting it had when the radar was turned off.
Pressing the “ —“ key decreases the range one level; pressing the “ +” increases the range.
Pressing the Menu key after making and adjustment returns the radar to its normal
operating mode. Pressing the Menu key without making an adjustment causes the radar to
move on to the next menu setting.
Two presses of the menu button – Adjust the squelch
The squelch has two settings: on and off. Squelch on causes the radar to only produce an
audio tone when a target is present, while Squelch off causes the Doppler return signal t o
be amplified at all times. During squelch adjustment, “S” is displayed in the middle
window of the radar, followed by the current setting (“n” for on and “f” for off).
On its initial power -up, the squelch is initially on. On subsequent power -ups, the BEE III
retains the squelch setting it had when the radar was turned off.
Pressing either the “ —“ key or the “+” increases causes the radar to toggle between
Squelch on and Squelch off. Pressing the Menu key after making and adjustment returns
the radar to its normal operating mode. Pressing the Menu key without making an
adjustment causes the radar to move on to the next menu setting.