Data Sheet

CONNECT
Page 2 / 2
CARBON MONOXIDE / CO DETECTORS
Carbon monoxide detector / CO sensor GS 80.22 knx
Technical data
Supply voltage via KNX bus voltage
Bus current
In standard operation 5mA
In alarm-case until 16 mA
Bus system KNX-TP
Inputs
1x test/reset input (T/R)
2x binary inputs
Inputs 1 & 2 combinable as external
temperature sensor input (PT1000 / Müller
TF06)
(this function occupies both inputs 1 & 2).
Outputs
2x binary outputs
- configurable as LED-driver (< 3 mA)
- configurable as PWM output signal
- configurable as „open-collector“ output with
the following specifications:
▪ ext. supply voltage U max . = 50 V DC
▪ max. current (I max ) = 80 mA
▪ output level low = 0,5 V DC
Sensors
Carbon monoxide (CO)
Temperature
Relative humidity
Measuring range CO-concentration 5...1.000 ppm (air pressure compensated)
Expected life span 8 years
Sound intensity > 85 dB (A) / 1m
Measuring range temperature 0°...+50° C
Measuring range
relative humidity
0...100%
Permitted ambient temperature 0°...+50° C
Housing self-extinguishing thermoplastic
Housing color studio white (similar to RAL 9016)
Mounting
Wall or ceiling mounting
(preferrably combined with hollow-wall box)
Type of connection
(KNX)
PCB push-in terminal block
Type of protection IP 20 (DIN EN 60529)
Class of protection III when installed according to regulations
Type of connection
external inputs/outputs
Wire diameter max. 6 x 0,5 mm²
strip length 7 mm
Functions and data provided to KNX bus:
CO (carbon monoxide)
Alarm functions
Value output
Thresholds
Relative humidity Value output
Temperature Value output
and much more...
Rights to technical amendments reserved / Technische Änderungen vorbehalten
Droits de modifications techniques réservés / Suscettibile di errori e modifiche
Hugo Müller Gmbh & Co KG | Sturmbühlstraße 145-149 | D-78054 VS-Schwenningen
Tel: [phone] | Fax: [phone] | E-Mail: [e-mail] | Internet: www.hugo-mueller.de