User's Manual

RWR95.50 Description

1.1.3 Declaration of Conformity

Declarations of Conformity can be requested as required. The contact information for this purpose is listed at the end

of these operating instructions.

1.1.4 FCC- / RSS-Declaration

 This device complies with Part 15 of the FCC Rules [and with Industry Canada licence-exempt RSS standard(s)].

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired

operation.

 This device has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when

the device is operated in a commercial environment. This device generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this device in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

 The radiated output power of the device is far below the FCC radio frequency exposure limits. Nevertheless, the

device shall be used in such a manner that the potential for human contact during normal operation is minimized.

1.1.5 Validity

This document is valid for the hardware available at the time of creation of these operating instructions. The

manufacturer reserves the right to make technical modifications.

The latest version of these operating instructions can be downloaded at www.mh-inprocess.com under Downloads.

1.2 Purpose

The radio-wave receiver RWR95.50 is used for reception of measuring signals from m&h touch probe system

RWP25.50.

1.3 System components

Fig. 1 System components

Radio-wave

Touch Probe

RWP25.50-G-PP/MY/TP

Radio-wave Receiver

RWR95.50-R

(cable outlet radial)

Radio-wave Receiver

RWR95.50-A

(cable outlet axial)