User's Manual

Operation RWR95.50
20
The touch probe RWP20.50 can be activated and deactivated by the radio-wave receiver RWR95.50. Once the M
code has been set, the touch probe will be activated in < 1 s and deactivated again < 1 s after reset.
The subsequent table shows the signal curves during probe activation in bi-directional mode:
Signal from control
Touch probe "A"
ON/OFF
to Pin 6
Touch probe "A"
RWP20.50
Signal from control
Touch probe "B"
ON/OFF
to Pin 7
Touch probe "A"
RWP20.50
Fig. 16 Signal curves during touch probe/tool setter activation in bi-directional mode
<1 s
<1 s
<2 s
<1 s
<1 s