User's Manual

RWR95.50 Operation
15
2.2.4 Output Circuit, Temperature Measuring Pin 8
Fig. 12 Output Circuit, Temperature Measuring Pin 8
2.2.5 Signal Connection
INFORMATION
Temperature measurement is not possible with signal connection!
INFORMATION
Signal connection is recommended, if the machine control cannot check "READY".
The signal connection can be dynamically activated and deactivated by M-Code.
Signal connection is active, if voltage >10 VDC (HIGH) is applied to Pin 8:
 "ERROR" causes "PROBE"
Fig. 13 Signal Connection
>10 VDC (HIGH)
Pin 8
red
max. 1 mA
RWR95.50
Internal
Signal
Pin 8
Input CNC
5-14 mA
A/D-converter (machine
control)
Shunt
max. 600 Ώ
Current source