User's Manual

Radio-wave Touch Probe RWP38.41
7
O
N
OF
F
0
V
>10VD
C
<1
,
5s
<1
,
5s
M-Code
Probe ON / OFF Procedure
The bi-directional probe will be activated and deactivated by the Radio-wave Receiver RWR95.40.
After setting the M-Code the probe is activated in <1,5 s and deactivated in <1,5 s after resetting.
Mounting the Shank
Removing the shank:
 Remove all „A“ and „C“ screws.
 Remove shank.
Assembling the shank:
 Carefully slide the shank onto the probe body. Align
the „C“ threads with the conical bores.
 Insert both clamping screws „C“ and tighten lightly.
 Insert adjustment screws „A“.
 Align the stylus to spindle center.(see page 3)
 Calibrate the probe!
Shank
Hexagon Key
A
F2mm #1097 / AF2.5mm #1346
C = Clamping Screw AF2.5mm (2x)
#1351 M=2 Nm
(
1.47 lbf.ft
)
A
= Adjustment Screw AF2mm (4x)
#135
2
M=1.5 Nm
(
1.1 lbf.ft
)
Clamping screw „C“
in conical bore
Probe
Adjustment screw „A“ in thread