User's Manual

RWP20.50 Operation
39
2.11 Modular System (Measuring Units PP41.00 and MY21.00)
NOTICE
Danger of material damage!
 Wipe the probe clean and dry before dismounting!
 Do NOT blow off with compressed air!
 When screwing in the extension, make sure the O-ring is properly seated.
 The probe may be extended by a maximum of 400 mm!
 Align probe in the spindle axis to the spindle centre.
 Calibrate the probe.
Fig. 20 Modular system
Measuring Unit Extensions
Order Number
Length
21.00-VE30
30 mm (1.18”)
21.00-VE50
50 mm (1.97”)
41.00-VE100
100 mm (3.94”)
41.00-VE200
200 mm (7.87”)
24x2 Viton O-ring
(2074)
Cross adapter
(41.00-KA)
Measuring unit
(41.00-PP or 21.00-MY)
Styli
refer to chapter 1.9.4
C-spanner
(2951)
Up to 5 measuring units can be fitted.
All unused screw holes in the cross
adapter must be sealed using screw
plugs 41.00-KA-V.