User's Manual

RWP20.50 Operation

5. Synchronise the touch probe. To do this, hold the IR interface of the touch probe directly in front of the IR

interface on the receiver. The receiver needs to be switched on for this (refer to Fig. 15).

► After successful synchronisation, both LEDs briefly illuminate green on the receiver and the display on the

touch probe stops blinking. Additionally the LEDs on the touch probe are lit in green.

Fig. 15 Synchronisation

6. Close the battery compartment sleeve.

NOTICE

Risk of material damage!

 When closing the battery compartment, ensure the O-ring is properly seated!

2.7.2 Menu Structure

Fig. 16 Menu structure

Setting level 1

Setting level 2

Activation

Activation code

Interference safety

0.0.

Fast

WS/ME

0.1.

Normal

0.2.

Secure

Setting level 1

Activation

method/code

Setting level 2

Transmission power

Synchronisation

Initial state

Standby or Operation

Press push button for 1 s

Wait for at least 3 s

Synchronisation successful

-> back to the initial state

IR interface