User's Manual

Description RWP20.50
22
1.9.6 Shanks
NOTICE
Risk of collision caused by incorrect input of probe length
The touch probe length specified in the subsequent tables is only valid for measuring unit PP41.00.
For the additional available measuring units the following values have to be added:
 MY21.00 (15 mm or 0.59")
 TP44.10 (13.5 mm or 0.53")
Shanks for activation method AZ
Possible shanks
Activation
pulling force
Length L (Fig. 3)
with PP41.00
Order Number
(MM = Measuring unit, XX=AZ-type, refer to
1.9.7)
DIN69871-SK30
315 N
133 mm (5.24”)
20.50-G-MM-SK30-XX-AZ
DIN69871-SK40
830 N
135 mm (5.31”)
20.50-G-MM-SK40-XX-AZ
DIN69871-SK50
760 N
135 mm (5.31”)
20.50-G-MM-SK50-XX-AZ
DIN2080-SK50
760 N
131 mm (5.16”)
20.50-G-MM-DIN2080-SK50-XX-AZ
DIN69871-SK60
-
155 mm (6.10”)
20.50-G-MM-SK60-XX-AZ
BT40
830 N
135 mm (5.31”)
20.50-G-MM-BT40-XX-AZ
BT50
760 N
150 mm (5.90“)
20.50-G-MM-BT50-XX-AZ
CAT40
830 N
135 mm (5.31”)
20.50-G-MM-AN40-XX-AZ
CAT50
760 N
135 mm (5.31”)
20.50-G-MM-AN50-XX-AZ
Nikken-NC5-46
-
154 mm (6.06”)
20.50-G-MM-NC5-46-AZ
Nikken-NC5-63
-
154 mm (6.06”)
20.50-G-MM-NC5-63-AZ
Other shanks
-
Upon request
Shanks for activation method WS
Possible shanks
Activation pressure
(Coolant/Spindle air)
Length L (Fig. 3)
with PP41.00
Order Number
(MM = Measuring unit)
DIN69871-SK30
3.5 bar (50 psi) – 50 bar (725 psi)
133 mm (5.24”)
20.50-G-MM-SK30-WS
DIN69871-SK30-MUBEA
3.5 bar (50 psi) – 50 bar (725 psi)
133 mm (5.24”)
20.50-G-MM-SK30-MUBEA-
WS
DIN69871-SK40
3.5 bar (50 psi) – 50 bar (725 psi)
135 mm (5.31”)
20.50-G-MM-SK40-WS
DIN69871-SK50
3.5 bar (50 psi) – 50 bar (725 psi)
135 mm (5.31”)
20.50-G-MM-SK50-WS
DIN2080-SK50
3.5 bar (50 psi) – 50 bar (725 psi)
131 mm (5.16”)
20.50-G-MM-DIN2080-SK50-
WS
DIN69871-SK60
3.5 bar (50 psi) – 50 bar (725 psi)
155 mm (6.10”)
20.50-G-MM-SK60-WS
BT30
3.5 bar (50 psi) – 50 bar (725 psi)
133 mm (5.24”)
20.50-G-MM-BT30-WS
BT40
3.5 bar (50 psi) – 50 bar (725 psi)
135 mm (5.31”)
20.50-G-MM-BT40-WS
BT50
3.5 bar (50 psi) – 50 bar (725 psi)
150 mm (5.91”)
20.50-G-MM-BT50-WS
CAT40
3.5 bar (50 psi) – 50 bar (725 psi)
135 mm (5.31”)
20.50-G-MM-AN40-WS
CAT50
3.5 bar (50 psi) – 50 bar (725 psi)
135 mm (5.31”)
20.50-G-MM-AN50-WS
DIN69893-HSK-A63
3.5 bar (50 psi) – 50 bar (725 psi)
155 mm (6.10”)
20.50-G-MM-HSK63A-WS
DIN69893-HSK-F63
3.5 bar (50 psi) – 50 bar (725 psi)
160 mm (6.30”)
20.50-G-MM-HSK63F-WS
DIN69893-HSK-A80
3.5 bar (50 psi) – 50 bar (725 psi)
160 mm (6.30”)
20.50-G-MM-HSK80A-WS
DIN69893-HSK-A100
3.5 bar (50 psi) – 50 bar (725 psi)
160 mm (6.30”)
20.50-G-MM-HSK100A-WS
Coromant Capto C5
3.5 bar (50 psi) – 50 bar (725 psi)
160 mm (6.30”)
20.50-G-MM-C5-WS
Coromant Capto C6
3.5 bar (50 psi) – 50 bar (725 psi)
160 mm (6.30”)
20.50-G-MM-C6-WS
Coromant Capto C8
3.5 bar (50 psi) – 50 bar (725 psi)
160 mm (6.30”)
20.50-G-MM-C8-WS
Nikken-NC5-46
3.5 bar (50 psi) – 50 bar (725 psi)
154 mm (6.06”)
20.50-G-MM-NC5-46-WS
Nikken-NC5-63
3.5 bar (50 psi) – 50 bar (725 psi)
154 mm (6.06”)
20.50-G-MM-NC5-63-WS
Kennametal KM63
3.5 bar (50 psi) – 50 bar (725 psi)
160 mm (6.30”)
20.50-G-MM-KM63-WS
Kennametal KM80
3.5 bar (50 psi) – 50 bar (725 psi)
160 mm (6.30”)
20.50-G-MM-KM80-WS
D28-VDI40-W
3.5 bar (50 psi) – 50 bar (725 psi)
137 mm (5.39”)
20.50-G-MM-VDI40-WS
D28-VDI50-W
3.5 bar (50 psi) – 50 bar (725 psi)
137 mm (5.39”)
20.50-G-MM-VDI50-WS
D28-VDI60-W
3.5 bar (50 psi) – 50 bar (725 psi)
137 mm (5.39”)
20.50-G-MM-VDI60-WS
D28-VDI80-W
3.5 bar (50 psi) – 50 bar (725 psi)
137 mm (5.39”)
20.50-G-MM-VDI80-WS
Other shanks
-
Upon request