Operating Instructions

Operation RC-R-100
34
2.9 Laser scanning
During laser scanning, data is transmitted from the laser scanner to the radio-wave receiver on 2 paths. The laser
scanner is activated/deactivated by the receiver, and the operating parameters ("READY", "PROBE", "LOW
BATTERY") of the laser scanner are transmitted to the receiver via a 2.4 GHz radio-wave connection. The scan data
(measurement data) are transmitted via an additional WLAN connection, which is automatically set up once during
pairing (see chapter 2.4.2). The scan data are then forwarded via a network connection from the receiver to a PC,
where they can be processed/evaluated in real time using the NC Measure evaluation software.
Data transfer during laser scanning
Radio-wave 2.4 GHz
WLAN
Radio-wave receiver
RC-R-100
Laser scanner
LS-R-4.8
Transmission of operating parameters
Activate/deactivate scanner
Transmission of scan data
Scan data