Operating Instructions

RC-R-100 Operation
25
2.2.2.5 Output Circuit, Temperature measurement Pin 10
Output Circuit, Temperature/Ultrasonic Measurement Pin 10
2.2.2.6 Signal Connection
INFORMATION
Temperature measurement is not possible with signal connection!
INFORMATION
Signal connection is recommended, if the machine control cannot check READY.
The signal connection is scanned once when the receiver restarts.
Signal connection is active, if a voltage >10 VDC (HIGH) is applied to Pin 12:
• ERROR causes PROBE
Signal Connection
Pin 12
Low < 3 V – min. GND 0 V
High > 10 V – max. 30 V
>10 VDC (HIGH)
max. 1 mA
RC-R-100
Internal
Signal
Pin 10
Input CNC 5-14 mA
Control
(A/D converter)
Shunt max. 600 Ώ
Current source
Input CNC max. 20 mA
Control
(digital input)
Temperature
Ultrasonic
or