Operating Instructions

RC-R-100 Operation
21
2.2 Connection
2.2.1 Overview over machine control/PC connections
2.2.1.1 Connections when using the laser scanner LS-R-4.8
Overview of connections when using the laser scanner LS-R-4.8
NOTICE
Risk of malfunctions due to poor network connection!
To ensure the best possible network connection, it is recommended to use a PC with 2 RJ45 network
connections.
When using a PC with only one RJ45 network connection, a USB3.0/RJ45 adapter can be used to provide a
second network connection on the PC. The following instructions must be observed to ensure reliable function of
the laser scanner system.
• Always connect the PC to the radio-wave receiver via a direct network connection (without adapter).
• Connect the PC to the machine control using a USB3.0/RJ45 adapter.
Radio-wave receiver
RC-R-100
Laser scanner
LS-R-4.8
Network adapter M12
D-Code/RJ45*
(6407)
Ethernet cable*
with RJ45 plugs
Sensor cable
5 m (H00028050)
10 m (H00028051)
15 m (H00028052)
30 m (H00028053)
Ethernet cable M12-4
(optional)
5 m (H00028047)
10 m (H00028048)
30 m (H00028049)
* contained in ethernet connecting
package (RC-R-ETHERNETPACK)