Instruction Manual

T. 1300 222 445 | www.melec.com.au
Outline / Application:
This part can only be completed once the attendee has completed LED strips Part 1 through 3, in this design course we take 3 very different
scenarios and design an LED lighting system based around a customer's requirements and expectations.
04 LED STRIP - PART 4 DESIGN AN INSTALLATION
LESSON PLAN
Objective
Our objective is to ensure upon completion of this lesson you have a clear understanding of how LED strip installation and components list.
Equipment required / provided
Required:
• Basic needs - writing implement and paper
Provided:
• You will be proved basic information to enable you to design an LED strip install
• There will be a handout available and handed out for reference
• There will be a questionnaire to complete at the end
Course information and reference Material
Lesson information
During this lesson we will discuss the following items in the following order:
1. How do I know what is required?
2. What is the available range of LED strip and accessories?
3. Case Studies
4. Assessing voltage drop
5. Wiring examples
6. Work sheet #1
7. Work sheet #2
8. Work sheet #3
Reference Material:
1. Power point presentation
2. Handout
Lesson Questionnaire and attendance sheet