Instructions

GB
ENGLISH | VDV-707
19
T15 = Down arrow
T16 = Save
T17 = Confirm
T18 = Cancel
Using the image memory
To call up the image memory, touch the monitor anywhere on the
touch-active area (17) with your finger. After having touched the
screen, the image last recorded is displayed, as shown in Fig. 1.
Touching the button (T6) or (T7) takes you to the previous or next
image. Touch the button (T9) to delete the image currently visible.
Please note that the image is deleted directly and without prompting to
ask if you are certain.
Touch the button (T8) or wait about 15 seconds to quit the image
memory.
Settings for the image memory function
Call up the image memory by touching the screen with your finger.
Then touch the button (T1) to call up the Settings menu. You can
return to the previous menu at any time by touching the button (T8),
although settings not saved will then be lost.
The following settings can be made:
Delete all images (Fig. 2)
All images can be deleted at once by touching the button (T12). This
must be confirmed by subsequently touching the button (T17). If you
touch the button (T18) instead, the images will be retained. Once the
images are deleted this step cannot be undone.
Language (Fig. 3)
Touch the button (T10) to change the language. Four languages are
available for selection (DE/EN/FR/NL). Touch the button (T14) or (T15)
to select the entry below or above this. The selected entry is highlighted
blue. After you have selected the desired language, save it by touching
the button (T16).
After this, you need to confirm the procedure again (T17) or you can
cancel it (T18).
Time (Fig. 4)
The time must be set so that the images are marked with the correct
time. For this, press the button (T11) in the Settings menu. You can
change the entry highlighted blue via the buttons (T14) and (T15). The
button (T7) takes you to the next entry. After having selected between
24h or 12h display, first set the day, then the month and year. The
next entry is then the time with hour and minute. Once all settings
are correct, touch the button (T16) to save the settings. This must be
confirmed by touching the button (T17), but can also be cancelled by
touching the button (T18).
Fig.3
Fig.2
Fig.1
Fig.4