Manual

COMMISSIONING AND OPERATION
The hand-held transmitter is delivered readyfor use with the battery inserted.
The hand-held transmitter is put into operation byteaching it to a suitable
ODYON pro receiver (see description of ODYON pro receiver).The function
triggered by this depends on the receiver and its wiring. A hand-held transmitter
can control several receiverswith dierent wiring at the same time.
Reception control
If a button for channel 1-4 is pressed on the hand-held transmitter,the control
LED briey lights up green. The receiver sends back a conrmation and the con-
trol LED ashes red/green briey for conrmation.
If the control LED does not ash red/green, the corresponding button is either not
tuned in to a receiveror the hand-held transmitter is out of range ofthe receiver.
Automatic key lock
The hand-held transmitter is equipped with an automatic key lock to prevent
unintentional actuation of a function key(4), e.g. if the hand-held transmitter is in
a pocket.
Activatingthe automatic keylock
Press and hold the standby button (3) for approx. 5 seconds until the control LED
(2)ashes green.
Deactivatingthe automatic keylock
Press and hold the standby button for approx. 5 seconds until the control LED
ashes red.
If the automatic key lock is activated, the hand-held transmitter must be brought
out of sleep mode by briey pressing the standby key and then allows the taught-
in functions by pressing the key. If no further button is pressed within 5 seconds,
the hand-held transmitter returns to sleep mode.
When the keylock is deactivated, one of the function keys can be pressed directly
at anytime and the radio signal is transmitted.
EN
16