Installation Guide
FRSS0837ST
2
Chair Assembly
Step 1:
• Place the chair frame (A) on a soft surface.
Line up the bolt holes on the chair frame
(A) and Base (B). Put M6 plastic washer (F)
in the middle of two tabs, then insert M6x25
bolt (C) through two tabs, M6 plastic
washer (F), M6 flat washer (E), M6 nut (D).
Tighten using the Allen wrench (G) and hex
wrench (H) .
Step 2:
• Ensure all connections are secure.
• Turn the chair right side up.
• Place cushion (I) on the chair as shown.