SDS

Material Safety Data Sheet
VINYL EXTRUSIONS
EXTRUDED VINYL WEATHERSTRIP PRODUCTS
Macklanburg-Duncan Co. MSDS Page 1 of
2
Complies with OSHA's Hazard Communication Standard CFR 1910.1200
I. Chemical Product and Company Identification
Material Identity HMIS: H: 0 / F: 0 / R: 0 / P: 0
Product Code and Name: Extruded Vinyl Weatherstrip Products
Product Class: Weatherstrip
DOT Class: None
Manufacturer: Macklanburg-Duncan 24 Hour Emergency: Chemtrec 1(800)424-9300
4041 North Santa Fe
Oklahoma City, OK 73118
1(800)654
-
8454
Date Prepared:
October 5, 1999
Replaces:
March 24, 1998
II. Composition/Information on Hazardous Ingredients
Component OSHA PEL ACGIH TLV % CAS Number
Polyvinyl Chloride
NE
NE
< 45
9002
-
86
-
2
Phthalate Plasticizer
NE
NE
< 45
6422
-
86
-
2
This product is non-hazardous under conditions of normal use.
III. Physical Data
Vapor Density (air = 1):
Not applicable
Boiling Point:
Not applicable
Specific Gravity:
1.33
Percent Volatile by Volume:
Not applicable
Solubility in Water:
Insoluble
Vapor Pressure (mm/Hg):
Not applicable
Evaporation Rate (butyl acetate =1):
Not applicable
Appearance and odor:
Porous, soft, spongy solid
% Solids:
Not applicable
V.O.C.:
Not applicable
IV. Fire and Explosion Hazards
Flash Point (Method Used):
Not applicable
Flammable Limits:
Not determined
Extinguishing Media:
Carbon dioxide, foam, dry chemical, or water
Special Fire Fighting Procedures:
Wear self-contained breathing apparatus in positive pressure mode and full protective gear.
Unusual Fire and Explosion
Hazards:
Irritating or toxic gases and aerosols may be produced during burning.
V. Reactivity Data
Stability:
Stable
Conditions to Avoid:
Flames, sparks
Incompatibility (Materials to Avoid):
None
Hazardous Decomposition Products:
Carbon dioxide, carbon monoxide, Hydrochloric acid