Operating Manual Electronic Temperature Controller Type TRN, TRN/20, TRM, TRM/20, TRH and TRH /20 Gas sampling and conditioning technology 2-5.1.
Dear Customer, we have made up this operating manual in such a way that all necessary information about the product can be found and understood quickly and easily. Should you still have any question, please do not hesitate to contact M&C directly or go through your appointed dealer. Respective contact addresses are to be found in the annexe to this operating manual. Please also contact our homepage www.mc-techgroup.com for further information about our products.
Contents 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 General information ...................................................................................................................... 4 Declaration of conformity ............................................................................................................. 4 Safety instructions ........................................................................................................................ 5 Warranty ................................
Head Office M&C TechGroup Germany GmbH Rehhecke 79 40885 Ratingen Germany Telephone: 02102 / 935 - 0 Fax: 02102 / 935 - 111 E - mail: info@mc-techgroup.com www.mc-techgroup.com 1 GENERAL INFORMATION The product described in this operating manual has been examined before delivery and left our works in perfect condition related to safety regulations. In order to keep this condition and to guarantee a safe operation, it is important to heed the notes and prescriptions made in this operating manual.
3 SAFETY INSTRUCTIONS Please take care of the following basic safety procedures when mounting, starting up or operating this equipment: Read this operating manual before starting up and use of the equipment. The information and warnings given in this operating manual must be heeded. Any work on electrical equipment is only to be carried out by trained specialists as per the regulations currently in force.
5 USED TERMS AND SIGNAL INDICATIONS DANGER! This means that death, severe physical injuries and/or important material damages will occur in case the respective safety measures are not fulfilled. WARNING! This means that death, severe physical injuries and/or important material damages may occur in case the respective safety measures are not fulfilled. This means that minor physical injuries may occur in case the respective safety measures are not fulfilled.
6 APPLICATION The TR... series ready-to-plug-in, on - off electronic temperature controllers are especially suitable for controlling electrically heated sample lines 3/4/5-N/H/M series. 7 TECHNICAL DATA Temperature controller Part No. of standard version Part No. of version Temperature control range Switching capacity type TR. - 10 A TR./20 - 20 A Control mode Temperature sensor input Ambient temperature Storage temperature Electrical connection for TR.
9 RECEIPT OF GOODS AND STORAGE Immediately after arrival, remove the controller and eventual accessories carefully from the packing and check the articles for completeness against the packing list; Check the goods for any damage during transportation and, if required, inform your shipping insurance immediately of the damage found. The controller should be stored in a weather-protected and frost-free area! NOTE! 10 INSTALLATION INSTRUCTIONS AND DIMENSIONS Figure 1 2-5.1.2-ME Dimensions TR...
11 ELECTRICAL CONNECTIONS WARNING! WARNING! A wrong mains voltage can destroy the device. Please ensure that the supply voltage is identical to the indication on the type plate! When setting high-power electrical units with nominal voltages of up to 1000V, attention must be paid to the requirements of VDE 0100 together with the associated standards and stipulations! A main switch must be provided externally.
Check whether the controller is functioning properly: Set maximum desired temperature yellow LED lights up When the desired temperature is reached controller switches heating off, yellow LED goes out. On installation, the controller should basically be checked to see whether it switches at the set values and reaches the desired operating temperature. 13 CLOSING DOWN No special measures are to be taken for closing down the equipment. 14 MAINTENANCE AND REPAIR The controller TR...
