Operator's manual User Manual

14 Gas sampling and gas conditioning technology 2-1.1-ME
The following prefilters can be selected :
Prefilter
Type
Part no.
Temp.
max.
°C
Material
filter / connec-
tion
Filter
porosity
µm
Dust
content
g/m
3
Inside
volume
displacer
Length
mm
Filter
ø mm
Con-
nection
SP2000/20SS 150 20S9160 600 SS316/316Ti 20 2-10 150 31 ø 25
SP2000/V20 20S9085 600 SS316/316Ti 2 2-10 220 46 G 3/4"a
SP2000/V20-0 20S9105 600 SS316/316Ti 2 2-10 X 220 46 G 3/4"a
SP2000/V20/HC 20S9095 900 Hastelloy-C 2 2-10 220 46 G 3/4"a
SP2000/V20-0/HC 20S9115 900 Hastelloy-C 2 2-10 X 220 46 G 3/4"a
SP2000/V20-T 20S9315 200 PTFE / SS316Ti 3 > 10 400 65 G 3/4"a
SP2000/V20-2 20S9125 600 SS316/316Ti 2 > 10 520 60 G 3/4"a
SP2000/V20-1 20S9145 600 SS316/316Ti 2 > 10 X 520 60 G 3/4"a
SP2000/V20-2/HC 20S9135 900 Hastelloy-C 2 > 10 520 60 G 3/4"a
SP2000/V20-1/HC 20S9155 900 Hastelloy-C 2 > 10 X 520 60 G 3/4"a
SP2000/V20-4
1)
20S9290 600 SS316/316Ti 2 2-10
1)
300 31 G 3/4"a
SP2000/V20-3
1)
20S9300 600 SS316/316Ti 2 2-10 X
1)
300 31 G 3/4"a
SP2000/V20-5 20S9127 500 SS316/316Ti 3 2-10 220 50 G 3/4"a
SP2000/V20-6 20S9128 500 SS316/316Ti 3 > 10 520 60 G 3/4"a
SP2000/V12-1 20S9500 1000
Keramik
5)
/
SS316Ti
1 > 10 500 40
DN65
PN6
SP2000/V12-3 20S9510 1000
Keramik
5)
/
SS316Ti
1 > 10 optional 1000 60
DN65
PN6
SP2000/V12-2 20S9505 1000
Keramik
5)
/
SS316Ti
2 > 10 optional 1000 60
DN65
PN6
SP2000/V12-1/SS
2)
20S9525 600
Keramik
5)
/
SS316Ti
1 > 10 500 40
DN65
PN6
SP2000/V12-3/SS
3)
20S9535 600
Keramik
5)
/
SS316Ti
1 > 10 optional 1000 60
DN100
PN6
SP2000/V12-2/SS
3)
20S9530 600
Keramik
5)
/
SS316Ti
2 > 10 optional 1000 60
DN100
PN6
SP2000/V12-1/IC
2)
20S9540 1000
Keramik
5)
/
Incoloy-SS316Ti
1 > 10 500 40
DN65
PN6
SP2000/V12-3/IC
3)
20S9550 1000
Keramik
5)
/
Incoloy-SS316Ti
1 > 10 optional 1000 60
DN100
PN6
SP2000/V12-2/IC
3)
20S9545 1000
Keramik
5)
/
Incoloy-SS316Ti
2 > 10 optional 1000 60
DN100
PN6
1)
Prefilter V20-3, V20-4 optional up to 1000 mm length available.
2)
With protection tube V12-1.
3)
With protection tube V12-2/3.
4)
Prefilter with special construction for efficient back purge.
5)
Please pay attention to the characteristic feature of ceramic in case of high and changing temperatures!
For more information about prefilters see data sheet 2-1.1.0.8
12 RECEIPT OF GOODS AND STORAGE
 The gas sample probe and any special accessories should be removed carefully from the packag-
ing and checked immediately for completeness against the delivery note.
 Check the goods for any damage incurred during transport and if necessary inform your transport
insurer of any damage.
The gas sample probe is normally delivered in two packaging units:
1. The gas sample probe with the screws, nuts and flange seal required for mounting.
2. Sample tube or prefilter, if applicable with extension tube.