Operator's manual

16
Gas sampling and gas conditioning technology 2-1.1.6-ME
The following pictures should explain the above mentioned steps.
Figure 4 Removing the new filter housing lid
The new locking is available as a complete set for sample probes older than serial number
10283 (part no.: 93 S 0081).
13 ELECTRICAL CONNECTIONS
W A R N I N G !
When connecting the equipment, please ensure that the supply
voltage is identical with the information provided on the model type
plate.
W A R N I N G !
Use always the low temperature alarm. In case of an alarm the flow
can be stopped and the components downstream the probe are
safe for demage.