Operator's manual Owner's manual

16
Gas sampling and gas conditioning technology 2-1.0.1-ME
18 SPARE PARTS LIST
Wear, tear and replacement part requirements depend on specific operating conditions.
The recommended quantities are based on experience and they are not binding.
Gas sample probe SP210-H, SP210-H/W
(C) Consumable parts
(R) Recommended spare parts
(S) Spare parts
Recommended quantity being in
operation [years]
Part No. Indication
C/R/S
1 2 3
90 S 0015
Ceramic filter element S-2K, 2 µm, 75 mm e
C 6 12 18
93 S 0045
Viton - gasket (30) h
R 4 8 12
93 S 0027
Probe heat sealing plate for SP210-H. Material: Viton. j
R 2 4 6
93 S 0029
Viton O-ring set for SP210-H i
R 2 4 8
93 S 0028
Viton O-ring k
R 1 2 3
90 S 2080
Novapress gasket 3/4" (blue), max. 600°C R 1 2 3
90 S 2077
Novapress flange gasket DN65PN6 (67mm i.) R 1 1 1
90 S 2075
flange gasket set for DN65 PN6 B, consisting of Novapress
gasket (67mm i.) and screws set M12
S 1 1 1
93 S 2105
Min. temperature contact <160°C R 1 1 1
93 S 2110
Cartridge heater HLPSR, 100mm, 110-240V 100W R 2 2 4
93 S 2130 Silicon-thermal insulation (red) R 0 1 1
19 APPENDIX
Further product documentation can be seen and downloaded from our home page:
www.mc-techgroup.com
• Sample tubes series SP, Document: 2-1.1.0.6
• Prefilter series SP, Document: 2-1.1.0.8