User Manual

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[e-mail] • www.mc-techgroup.com • Fon [phone] • Fax [phone]
2.3a
Technical specications and illustrations are without
obligation, subject to modications. 09.96/06.06
Dimensions
1/4"NPT
1/8"NPT
(P 1-6bar)
(P 3-10bar)
(P >0,7bar)
1/4"NPT
1/8"NPT
(P 1-6bar)
(P 3-10bar)
(P >0,7bar)
Check valve
Tube 3/8" o.d.
Blow back in
Sample outCal.-gas in
Control in
Isolation valve
Check valve
Tube 3/8" o.d.
Control inBlow back in
Sample outCal.-gas in
Flange 3" 150lbs RF
Tube 1/4" o.d.
SP2020-H/C/I/BB/FSP2020-H/C/I/BB
Check valve
Flange 3" 150lbs RF
Tube 1/4" o.d.
Isolation valve
Dimensions in mm
For further technical informations see standard probe SP2000-H.
Following options are included: SP2020-H....
Flange 3“ 150 Ibs
Power 115V AC
Calibration gas connection tube connector 1/4“o.d.
Blow back gas connection tube connector 3/8“o.d.
Operating temperature max. 220 °C /H220
Calibration gas injection valve /C
Isolation valve /I
Valve for blow back of the filter housing area /BB
Valve for blow back of the incorporated ceramic filter /BB/F
SP2020-H/C/I/BB SP2020-H/C/I/BB/F SP2020-H220/C/I/BB SP2020-H220/C/I/BB/F
Part Number 20S2020a 20S2025a 20S2021a 20S2030a
Operating temperature max. 180 °C max. 220°C
Power supply 115V 60Hz, 800W
Calibration gas valve /C Check valve, cracking pressure: >0,7 bar g connection: tube connector 1/4“ o.d.
Isolation valve /I Bellow valve with pneum, actuator, control pressure: 3-10 bar g connection: 1/8“NPT i
Blow back valves / BB
Blow back valves /BB/F
High flow rate check valve, cracking pressure: >0,7 bar g, recommended: 3-6 bar g
we recommend short pressure pushes to avoid decreasing of temperature in blow back area. connection: tube connector
3/8“ o.d.
Flange material: stainless steel 316Ti, dimensions: 3“ 150 Ibs
Technical Data