User Manual

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[e-mail] • www.mc-techgroup.com • Fon [phone] • Fax [phone]
2.3a

Heated sample probe with integrated
valves for:

Calibration gas injection

Probe outlet isolation

Blow back
Special Features
Gas Sample Probe Series SP®
Version SP2020-H(220)/C/I/BB and
SP2020-H(220)/C/I/BB/F
SP2020-H(220)/C/I/BB/(F)
Description
The M&C probe SP2020-H(220)/C/I/BB
and /BB/F is based on the standard probe
SP2000-H.
• Calibration gas will be injected into
the probe through a check valve /C
directly to the sample outlet. No cali-
bration gas is lost into the stack.
• An isolation valve /I shuts off the sam-
ple outlet from the internal filter area.
• Through a high flow rate check valve
/BB, which is fixed to the internal
probe area, blow back of the filter
housing area and the insitu probe
tube will be done.
• Through a high flow rate check valve
/BB/F, which is fixed to the filter
housing wall, blow back of the incor-
porated ceramic filter will be done
incl. the filter area and the insitu
probe tube.
Technical specications and illustrations are without
obligation, subject to modications. 09.96/06.06
Embracing Challenge