Operator's manual User guide

Gas sampling and gas conditioning technology 2-1.1.4-ME

12.1 DISMOUNTING THE FILTER HOUSING COVER AND CHECKING THE FILTE-

RELEMENT

For this purpose, the filter housing cover must be dismounted as follows:

Figure 3 Schematic drawing of the filter housing cover

 Remove the protection cover;

 Turn the locking handle A for about one rotation to the left so that the lid is moved upwards;

 Put the handle C into position E;

 Swing the clamp clip B to the left (into direction G);

 Pull the filter housing lid out using the locking handle A.