Operator's manual Manual

8 Gas sampling and gas conditioning technology 2.7a-ME

7 TECHNICAL DATA

Gas Sample Probe Series SP® SP180-H

Part No. 02S1800

Weather protection shield yes

Mounting outdoors yes

Sample tube Type SP210/SS, stainless steel 316Ti, length 1 m* optional*

Sample temperature max. 600 °C*

Sample pressure 0.4 to 2 bar abs.

Ambient temperature -20 °C to +60 °C

Recommended for dust loadings up to 1 g/m

Filter chamber volume 70 ml

Filter element S-2K, filter porosity 2 μm, ceramic

Probe heating temperature +180 °C self-regulating

Ready for operation after 2 hours

Temperature alarm contact, alarm point <160 °C, NO

Temperature alarm, contact rating 250V-3A AC, 30V-3A DC

Connection sample outlet 1/4"-NPT inside, with 6 mm (DN4/6) Swagelok tube connector

Power supply 110 up to 240V 50 / 60Hz

Power consumption start up: 400VA, usual: 100VA, (fuse 6A)

Electrical connection terminals max. 2,5 mm

, cable glands 1 x M20x1,5 and 1 x M16 x

1,5

Electrical equipment standard EN 61010, EN 60335-1

Degree of protection IP54, EN 60529

Mounting flange DN65 PN6,B stainless steel 316Ti

Material of sample contacting parts SS 316 / 316Ti, FPM, ceramic

Weight 7,5 kg

Option

Part No.: 02 S 9200 Insitu probe tube out of stainless steel 316Ti type SP210/SS,

connection G3/4" o, ø 10/12, length 1 m*, incl. flange gasket.

* Standard, other versions on request.

P und T90 at flow of:

100 200 500

Nl/h

P pressure loss with new filter element S-2K:

4 7 15

mbar

T90 time-without sample tube/prefilter- 4,0 2,5 <1,0

Sec.

8 APPLICATIONS

The electrically heated M&C gas sample probe SP180-H is used for continuous gas sampling in

processes with dust densities of up to 1g/m³, operating pressure of up to max. 6 bar abs.,

temperatures of up to a maximum of 600°C or for high gas humidity. Thanks to its compact design it

requires only limited space. The gas sample probe SP180-H is equipped with a new protective cover

and can be used for outdoor mounting.