Owner's manual

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[e-mail] • www.mc-techgroup.com • Fon [phone] • Fax [phone]
10.8
Technical specications and illustrations are without
obligation, subject to modications. 09.96/11.06
Technical Data
34
175
11
90
6
71
300
60
250
3
1
2
G1/4"
1 : 2x PG13, 1x PG9; 2 : Heater elements; 3 : Thermometer, indicator for 50 - 250 ¡C
bar abs.
l/hr
100
200
300
400
500
600
700
800
900
max.
0
0,0 0,2 0,4 0,6
20 °C
180 °C
0,8 1,0 1,2 1,4 1,6 1,8 2,0 2,2 2,4 2,6 2,8 3,0
contact
On
1,5A
I>
(ext. contact to switch pump motor Off)
Status
121110
Tu < -30 C
1 2 3 4
Tsoll
765
8
230V 50Hz
M
100W 100W
Power
To > +30 C
0-180 C
Reset
N L L'
9
Sensor
Dimensions
Electrically heated pump MP26-H1
Performance characteristics MP26-H1
Electrical connections
Dimensions in mm
Diaphragm pump, heated series MP
®
MP26-H1 10 l/min 230V 50Hz
Part number 02P1300
Capacity max. 10,0 l/min at 180 °C, without pressure
Operating pressure max. 0,3 to 2,5 bar abs.
Sample temperature -20 to +200 °C
Ambient temperature -10 to +40 °C
Storage temperature -15 to +60 °C
Operation mode 100% continous duty, start of the pump only without pressure!
Power supply Motor = 230V 50Hz*, 1,1 A, incl. protective motor switch *Standard
Heater = 230V 50Hz*, 2,0 A *Standard
Degree of protection IP 44 - EN60529 *Standard
Temperature adjustment 0-180 °C, (180 °C set in the factory)
Low temperature alarm contact Alarm point: ∆T 30 °C, contact rating: 250V, 3A~, 0,25A =
Weight 6,5 kg
Sample connection G1/4" i DIN ISO 228/1
Material of sample contacting parts PTFE, (and stainless steel nickel-plated)