Operator's manual Manual

8
Gas sampling and gas conditioning technology 3-1.1-ME
7 FUNCTION OF THE M&C JET-STREAM HEAT EXCHANGER
The coolers ECP 1000/2000/3000 with special design for analysis technique are prepared for
maximum flow rates of 350l/h.
The Jet-Stream heat exchangers made of Duran glass, optional PVDF or stainless steel are located in
a heat insulated cooling block. All the heat exchangers are easily accessible and are arranged in such
a way that they can be removed very simply. Figure 2 shows a schematic diagram of the functioning of
the heat exchanger.
+5°C
Sample gas
out
Sample gas
in
Condensate
out
Cooling-
block
Figure 2 Functioning diagram of the heat exchanger