Owner`s manual

6
CHAPTER 2 -
System Requirements, Installation, Con guration, Setup and Usage
CHAPTER 2 -
2.1.2.1
Apple OSX
Insert the distribution CD or download the .dmg installer  le from www.wayoutware.com.
Double click the .dmg installer to initiate installation.
If you agreed to the license, a TimewARP 2600 installer icon appears. Double-click it to
initiate the installation process.
When  nished, start Pro Tools and proceed to 2.1.3.1.
2.1.2.2
Windows XP
Insert the distribution CD or download the installer  le from www.wayoutware.com. Run
the .exe installer  le.
If you agreed to the license, follow the installer instructions.
When  nished, start Pro Tools and proceed to 2.1.3.1.
2.1.3
Setups
2.1.3.1
Real-time Instrument for Performance and Recording
The TimewARP 2600 can transform your computer into a real-time instrument for live
performance or recording.
To set this up, create an
audio
track in Pro Tools. Select either
mono
or
stereo
in the
track-creation window; this will determine, in turn, the channel options offered by the
TimewARP 2600 for this track.
In the mix window display for this track, at the track-inserts block up at the top, click on
the  rst
insert
selector. Choose the TimewARP 2600 plug-in from the appropriate menu.
insert selector. Choose the TimewARP 2600 plug-in from the appropriate menu.insert
Now create another track, but in the track creation dialog, choose
MIDI track
instead of
audio track,
and route the track output to the TimewARP 2600.
As
input
for the new track, select your MIDI keyboard device, and enable the track for
input for the new track, select your MIDI keyboard device, and enable the track for input
recording. Pro Tools will route all incoming MIDI events from your MIDI keyboard device
to the TimewARP 2600 plug-in.
If your MIDI keyboard has any additional MIDI control devices (sliders, knobs, buttons,
etc.), you can assign these to any TimewARP 2600 sliders, knobs and switches that you
choose. For details, see section 2.2.
2.1.3.2
Processing Audio Signals
The TimewARP 2600 can be used to process audio signals in a similar manner to a reverb
or other effects plug-in.
To set this up, create an
audio
track or select a track already recorded in Pro Tools. (If
this is a new track, select either
mono
or
stereo
in the track-creation window; this will
determine, in turn, the channel options offered by the TimewARP 2600 for this track.)
In the mix window display for this track, at the track-inserts block up at the top, click
on the  rst available
insert
selector. Choose the TimewARP 2600 plug-in from the
appropriate menu.