Specifications

LCD Display and Scribble Strip
The M24 features a 40 character by 4-line LCD display. The top row of the LCD display
usually is used to display the most recent control and value including a long channel name,
long control name and continuously updated control value.The next three lines of the
display usually are used to display the abbreviated channel names for all 24 channels active
in the current bank and act as channel scribble strips. Line 2 is for faders 1- 8, line 3 is
9- 16 and line 4 is 17- 24. The LCD has many additional modes and menus depending on
the current host software.The P1 in the far right of the first row indicates the current page
of controls that are active.The M24 has the ability to reassign just about every control on
the unit instantly to other functions in several pages allowing the use of faders and other
controls for very extensive control of plug ins and controllable instruments (software
dependent) extending the total number of available controls.
MIXED LOGIC
M24
COMPUTER HARDWARE
847
PHOTO - VIDEO - PRO AUDIO
ORDER & INFO. [phone] • FAX: [phone] [phone]
1-800-875-6951 • www.bhphotovideo.com
◆ The M24 has dedicated
Channel Select, Solo, and
Mute switches, 24 each
that correspond to the
same on screen channel
functions in the host
software depending on
the current bank.
◆ The 24 Solo and Mute
switches are always active,
and can be easily
reassigned to control
additional functions.
◆ 24 Soft switches are assignable to different functions, such as record enable,depending on the
host software.The Soft switches can also be assigned to automation arm, automation mode
and punch control depending on the current mode of automation and the host software.
◆ The Channel Select switch is used to select the current active channel assigned to the remaining
controls for effect sends (aux buses), dynamics, EQ and plug in controls.
Select, Solos, Mutes and Soft Switches
Connections
◆ 3 MIDI in and 3 MIDI out connectors
allow for multi program use or emulation
of three eight channel controllers.
◆ A USB connector provides a high-speed
connection to the host software.
◆ 25 pin accessory connector
◆ IEC320 Power connector for standard
power cords
Transport and Navigation
◆ The M24 has traditional tape style trans-
port controls with additional controls for
navigation, selection, editing, menu control
and parameter adjustment.
◆ The M24 features a large jog, shuttle con-
trol that can be used for audio scrubbing,
shuttling and navigation.Audio Scrubbing
is similar to rocking the reels back and
forth on an analog tape recorder and is
used during editing to help locate precise
start or end points of a sound.
Zoom, Grouping
and Mode Control
◆ The M24 has 10 switches that are used for
mode select and include functions for
Zoom, Grouping, Markers, Plug In mode
select, Utility and Function modes and
LCD and pan modes depending on host
software. The M24 has input and output
assignment capabilities as well.
Fader Flip Modes
◆ A SWAP switch below the Transport con-
trols is used to swap the channel faders
function to control the Aux Buss effect
send levels for the currently selected send
or the pan values if in Pan Flip mode. In
send flip mode the pan controls can
become send pan controls and send mutes
are also available.
Bank and Channel Swap
◆ You can swap the control assignments of
the faders, pan controls, solos,mutes and
soft controls in banks of 24 channels at a
time using the BANK SWAP left, right
arrow switches.If you are in the first bank
the M24 faders are assigned to tracks 1-24.
If you press the right BANK SWAP arrow
switch once, the M24 faders would be reas-
signed to represent channels 25-48 in a
song with over 24 tracks and the faders
would move to match the new bank's on
screen fader positions.
◆ Many of the supported software hosts can
also shift the 24 assigned channels up or
down one channel at a time. By pressing
the BUSS 8 / CHANNEL switch and light
the corresponding BUSS 8 / CHANNEL
led, you will change the function of the
BANK SWAP switches into channel shift
switches.
Weight and Construction
◆ Power supply: Two massive internal
international switching power supplies
(100-250V)
◆ Dimensions (WDH): 37.5 x 16.5 x 6˝
(without armrest or wood trim accessories)
◆ Heavy Duty 16 gauge steel chassis
◆ We ight 38 lbs (without armrest or wood
trim accessories)