User guide

Chapter 2: Controller Assignments Page

Torq 2.0 Controller Assignments User Guide

Export Button

Clicking this button lets you save all current controller assignments for the selected device to you hard drive

as an XML file. It’s definitely a good idea to save your current assignments before making changes or creating

new ones.

Reset Button

Clicking this button automatically recalls the factory controller assignments for the selected device, even if

you’ve accidentally deleted all of the assignments.

Clear Button

Clicking this button deletes all current controller assignments for the selected device.

Filter Buttons

These buttons let you view the current assignments based on the type of function. The available function

types are Global and Deck Based. This information is displayed in the Assignment List immediately below the

Filter buttons. Clicking on an item in the Assignment List displays the Assignment details and parameters in

Assignments Editor located in the lower half of the Controller Assignments Page. An explanation of each filter

follows.

Input

Clicking this button displays the list of current controller assignments in the Assignments List for all assigned

inputs. These assignments represent the mapping of hardware controls to the knobs, buttons and faders in the

Torq GUI.

Output

Clicking the Output button displays the list of Output assignments in the Assignments List for all assigned

outputs. These assignments represent the mapping of information sent from Torq to the various controls and

displays on your hardware such as the Level Meters. This button is not available when mapping the keys on

your computer keyboard to various Torq functions and parameters (see Chapter 5, “Keyboard Input Assign-

ments”).

Global

Clicking this button in combination with the Input or Output buttons displays the list of assignments for

Global functions such as the Crossfader and other Master Functions within Torq.

Deck Buttons (1 through 4)

These correspond to Decks A, B, C, and D respectively. Clicking any or all of them in combination with the

Input or Output buttons displays the list of assignments for Deck functions such as Deck Speed, Looping, EQ

functions and effects parameters on a per Deck basis.

Refer to Chapter 6, “MIDI Output Assignments” for more information.