User guide

Session KeyStudio Quick Start Guide

Setting Up the Micro USB Audio Interface

1. Once the Micro drivers have been installed via the Session software installation,

connect the Micro USB audio interface to an available USB port on your

computer. Your computer will recognize the new hardware and will brieﬂy

display a Found New Hardware message

. In Windows XP, you may be

prompted with a Windows Logo testing message. Click Continue Anyway

2. Double-click the red M-Audio icon in the system tray

to access the Micro

control panel. Here you can adjust input gain, monitor mix levels, output volume,

and buffer size (latency). The control panel also shows details about the

installed driver version

3. In order to hear sound from the Micro, it is necessary to connect headphones or

speakers to its 1/8” audio output jack. A microphone can also be connected to

the 1/8” microphone input.

Important: : Micro serves as a high performance, low latency USB audio interface.

This Quick Start Guide describes how to set up Session KeyStudio using the

Micro audio interface and ASIO audio drivers. For best low latency performance,

we strongly encourage you to use the enclosed Micro. You may be able to use

your existing audio interface with Session KeyStudio, and you can ﬁnd additional

information on using Session KeyStudio with alternate audio interfaces in the

complete User Guide. This User Guide can be downloaded for free from

www.m-audio.com.

Windows XP and Windows Vista

Windows XP

M-Audio icon M-Audio icon

Windows Vista