Specifications

Chapter 5: Configuring Your Pro Tools System 27
To rename I/O paths in I/O Setup:
1 Choose Setup > I/O.
2 Click the Input, Output, Insert, or Bus tab to
display the corresponding connections.
3 To change the name of a path or subpath,
double-click directly on the Path Name, type a
new name for the path, and press Enter.
4 Click OK.
Configuring MIDI Setup
If you plan to use any MIDI devices with Pro Tools,
do one of the following:
 On Windows, configure your MIDI setup with
MIDI Studio Setup. See Appendix A, “Configur-
ing MIDI Studio Setup (Windows Only)” for de-
tails.
– or –
 On Mac, configure your MIDI setup with Au-
dio MIDI Setup. See Appendix B, “Configuring
AMS (Mac OS X Only)” for details.
Backing Up Your System
Configuration
After configuring your system and Pro Tools,
you should save an image of your system drive
using a backup utility such as Norton Ghost. By
doing this, you can quickly restore your system
configuration and settings if you encounter any
problems.
I/O Setup dialog for Pro Tools M-Powered
(M-Audio FireWire 1814 shown)
See the Pro Tools Reference Guide (or choose
Help > Pro Tools Reference Guide) for more
information on renaming I/O paths.