User manual

5
twice. After releasing it, a panic action will be generated.
(4) ‘Duty on’ or ‘Duty off’ reports / ‘Status on’ Status off’ reports
Press the button (the LED will be temporally stay off) and release it when the LED flashes
3 times. After releasing it, a ‘Duty on’ report will be sent out. To deactivate: Press the
button (the LED will be temporally stay off) and release it when the LED flashes 3 times.
After releasing it, a ‘Duty off’ report will be sent out.
(5) Emergency release to exit ‘ARM’, ‘Anti-carjacking’ modes.
ignition ON, press and hold the button (the LED will be temporally stay off) and release it
when the LED flashes 5 times. After releasing it, ‘ARM’, ‘parking light’, and ‘horn’ outputs
will back to normal (Disarm) status.
1.8 H ISTORY REPORT
Flash memory for recording reports up to 3000 reports. It can be read out from the PC setup
program via serial port.
1.9 B ACKUP BATTERY ( OPTIONAL )
The system has a built-in rechargeable battery for emergency use. The system will send a
power cut report when all the external power is disconnected.
1.10 LED INDICATION
Three LED indicate the status of the POWER, GPRS signal and GPS signal.
1.11 K EEP ALIVE PROCEDURE
Keep alive procedure (in order keep connection in GPRS network, the unit can be set to
send short keep alive report to the server in order to prevent the disconnection from the
mobile service provider)