User guide

Chapter 5: Troubleshooting
24
Keystation Mini 32 User Guide
Full Reset
To send a Full Reset message:
1 Make sure your computer is running.
2 Switch on the Keystation Mini 32 by plugging in the USB Cable from your computer while simultaneously
holding down the Oct/Data “+” and “-” buttons.
This will reset all Data=_____ and controller assignments to the following values:
Parameter Factory Default
Program Number 000
Bank MSB Number 000
Bank LSB Number 000
Channel Number 00 (channel 1)
Octave shift 000
Transpose shift 000
Modulation Button MIDI CC 001
Volume Knob MIDI CC 007
Pitch Bend Buttons Pitch Bend
Octave Buttons - Assignment Data = Octave
Velocity Curve 1 = Normal