User guide

Chapter 6: Keyboard Zones

Axiom User Guide

Default Zone Channels

Zone Program

Program change messages are sent on active Zone channels, defining the instrument sound for each Zone.

This information is included in a stored Axiom preset, ensuring that the correct sound is accessed for each ac-

tive Zone whenever the preset is recalled.

To set the Zone Program Change number:

1 Select a Zone as described earlier.

2 Press the Program button (Prog). The LCD screen will display the current value and the active Zone number.

3 Enter the new program number using the number keys, or by repeatedly pressing the Patch “Up” or “Down”

buttons.

4 Press the Enter key. A program change message will be transmitted immediately.

5 Repeat steps 1 – 4 to assign new program numbers for the remaining Zones.

After configuring the program numbers and exiting Edit mode, activate all desired Zones by simultaneously

pressing their respective Zone buttons.

Zone LSB

Bank LSB messages are sent on active Zone channels, defining the instrument sound for each Zone. This in-

formation is included in a stored Axiom preset, ensuring that the correct sound is accessed for each active

Zone whenever the preset is recalled.

To set the Zone LSB value:

1 Select a Zone as described earlier.

2 Press the Edit button.

3 Press the Bank LSB key. The LCD screen will display the current Bank LSB value and active Zone number.

4 Enter the new Bank LSB value using the number keys.

5 Press the Enter key. The assigned Bank LSB value will be transmitted immediately.

6 Repeat steps 1 – 5 to assign new Bank LSB value for the remaining Zones.

After setting the Bank LSB values and exiting Edit mode, activate all desired Zones by simultaneously pressing

their respective Zone buttons.

Zone MIDI Channel

1 0 (Global Channel)